The Next Generation of Home Lifts
- E 200
E200 – The Most Adaptable & Versatile Home Elevator
A Smooth Journey, For Every Ride
All E200 home lifts come standard with Soft Start and Stop (SSS) devices through a dedicated motor, ensuring a jerk-free ride. This patented feature guarantees a smooth and seamless experience from the moment you press the call button.
Effortless Installation
Greaseless Rails (GLR) Technology
What sets the E200 home lift apart from other products in the market is the patented Greaseless Rail (GLR) technology. Despite operating on trusted hydraulic technology, the E200 doesn’t need oil or grease on the rails or anywhere else. This feature ensures a longer lifespan for your lift, prevents dust accumulation, and keeps your home clean and hygienic.
Energy Efficiency
Operating on a single-phase power supply, E200 home lifts consume no power while descending. In fact, the E200 uses the same amount of power as a half-ton air conditioner. This unique feature not only helps users financially but also makes the E200 an environmentally friendly elevator.
Safety is Always Our Priority
E-200 The Personification of Elegance
Walls –Choose from high-pressure laminates in various textures, colors, and effects.
Floor –Options include stone, carpet, or vinyl floorings in a range of colors.
Mirror –Select from slim vertical, half-wall, or full-wall mirrors.
Handrail –Opt for either stainless steel or gold handrails.
Platinum now available in our Patented Metallic Shaft
The required headroom for the shaft structure (distance from top floor to top of shaft) depends on the type of top roof and landing doors. This includes a free height of 30mm between metal shaft roof and building for installation purpose. Elongation of the shaft is possible. All the four sides will be cladded by the shaft panels in steel or glass, provided with a special gasket for water management. Also availabale essential panels to be mounted with silicon. It is highly recommended to use panels with gasket for outdoor installation. It is highly recommended to use steel panel on side G. The lowest and the top panels on the guide side are always provided with a round axial aerator. Typical Required Headroom with standard cabin. Please refer to “Feasibility information” section for futher details.
According to Eurocode, Seismic verification shall be checked with specifc calculations and defniton of fxing points for the specific unit
Shaft ceiling type
- Header diagonal
- Flat roof 1 or 2 pieces, depending on dimensions
- Inclined roof 1 or 2 pieces, depending on dimensions
Ramp
If the home lift is installed without a pit, a ramp is mandatory according to EN81.41. Please check compliance to local regulations. Usually a boardwalk with low incline is executed at the building site. Optionally we can provide a ramp 120 mm high and 1000 mm long,
made of aluminium and preventing slipping.
Get in Touch
The Elite Elevators SDN BHD,
G-13 Fera Residence,
No 47 Jalan 34/26 Wangsa Maju, 53300
Kuala Lumpur – Malaysia
Tel: +60-3-2705 4171 / +60-3-2705 4172
enquiry@eliteelevators.my
www.eliteelevators.my